PNI B6500 Manual De Usuario página 8

Vox
As long as there are noises in the child's room, the child
unit will emit continuously. Approximately 30 seconds
after the interruption of any noise, the unit will enter
standby mode (no longer emits). When the unit detects
noise again, it starts emitting. The time when it starts
emitting depends on the set sensitivity.
Microphone sensitivity control
K - Microphone sensitivity adjustment (Hi/Lo)
Move the knob to the right to activate the low
•
sensitivity of the microphone, a setting suitable for
noisy environments or when the child unit is close
to the child. The child unit starts emitting when the
sound reaches 60dB.
• Move the knob to the left to activate the high
sensitivity of the microphone, setting suitable for
quiet environments or when the child unit is further
away from the child. The child unit starts emitting
when the sound reaches 50dB.
Note: Position the child unit 1 - 3 meters away from the child.
8 - User manual