Descargar Imprimir esta página

HECATE G1500 BAR Guia De Inicio Rapido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3

Enlaces rápidos

EN Important safety instruction
•Please read the instructions carefully. Keep it in safe place for future
reference.
•Use only accessories approved by the manufacturer.
•Install the instrument properly by following the instructions in the device
connection section.
•Using the product in a 0-35°C environment is recommended. Shipping and
storing the product in a 0-35°C environment is recommended.
•To reduce the risk of fire and electric shock, do not expose the product to
rain or moisture.
•Do not use this product near water. Do not immerge the product into any
liquid or have it exposed to dripping or splashing.
•Do not install or use this product near any heat source (e.g. radiator,
heater, stove, or other devices that generate heat).
•Do not place any object filled with liquids, such as vases on the product;
neither should any open fire, such as lighted candles be placed on the
product.
•Do not block any ventilation openings. Do not insert any object into
ventilation openings or slots. It may cause fire or electric shock.
•Keep sufficient clearance around the product to maintain good ventilation
(minimum 5cm is recommended).
•Do not force a plug into the jack. Before connection, check for blockage in
the jack and whether the plug matches the jack and is oriented to the right
direction.
•Keep the provided accessories and parts (such as screws) away from
children to prevent from being swallowed by mistake.
•Do not open or remove the housing yourself. It may expose you to
dangerous voltage or other hazardous risks. Regardless the cause of
damage (such as damaged wire or plug, exposure to liquid splash or
foreign object falling in, exposure to rain or moisture, product not working
or being dropped, etc.), the repair has to be performed by an authorized
service professional immediately.
•Before cleaning the product with dry cloth, always turn of f the product
and disconnect the power plug first.
•Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents
to clean the product surface. Use only neutral solvent or clear water for
cleaning.
•The product must be used at an altitude of lower than 2000m.
Excessively loud music may lead to hearing loss. Please keep the
volume in a safe range.
Correct Disposal of this product. This marking indicates that this
product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for
environmental safe recycling.
For wireless product:
1. Wireless product may generate shortwave radio frequencies and interfere
with the normal use of other electronic devices or medical equipment.
2. Turn off the product when it's disallowed. Do not use the product in
medical facilities, on airplane, at gas stations, near automatic gates,
automatic fire alarm system or other automated devices.
3. Do not use the product in the vicinity of a pacemaker within a 20cm range.
The radio waves may affect the normal operation of the pacemaker or
other medical devices.
Product description and accessories
Power indicator
Power/Mode
switch button
Volume -
Volume +
Multi-function
"
" button
Input mode indicators
Sound mode indicators
USB-A power cable/audio cable
Headphone jack
Microphone jack
Microphone mute/unmute
Power connection
Bluetooth mode
x1
Switch to Bluetooth
mode, the " " icon
blinks in blue.
USB-A input mode
x1
Switch to USB-A
input mode
Installation of the sound effect adjustment
software
•Please log in HECATE home page website: www.hecategaming.com to
download software of G1500 BAR, find the "setup.exe" file, and install the
HECATE software (Windows 10 or later systems supported);
•Please follow the instructions to complete the installation.
Specifications
Power output: R/L: 2.5W+2.5W
Frequency response: R/L: 120Hz-20kHz
Input: 5V
1A
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power output: ≤10 dBm (EIRP)
There is no restriction of use.
Note:
•Images are for illustrative purposes only and may differ from the actual
product.
•For the need of technical improvement and system upgrade, information
and specifications contained herein may be slightly different from actual
product. If any difference is found, the actual product prevails.
Troubleshooting
No sound
•Check if the speaker is ON.
•Turn up the volume by using the volume control.
•Ensure the audio cables are firmly connected and the input is set
correctly on the speakers.
• Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
•Make sure the speaker is switched to Bluetooth input. If it is in other
audio input modes, Bluetooth will not connect. Disconnect from any
Bluetooth device by pressing the "
•Effective Bluetooth transmission range is 10 meters; please ensure that
operation is within the range.
• Try another Bluetooth device for connection.
The G1500 BAR does not turn on
• Check if USB power cable is connected.
Noise coming from speakers
•EDIFIER speakers generate little noise, while the background noise of
some audio devices may be too high. Please unplug audio cables and
turn the volume up, if no sound can be heard at 1 meter away from the
speaker, then there is no defect.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty questions, please visit the relevant country page on
www.edifier.com and review the section titled Warranty Terms.
USA and Canada: https://support.edifier-online.com/hc/en-us
South America: Please visit www.edifier.com (English) or www.edifierla.com
(Spanish/Portuguese) for local contact information.
For more information, please visit our website:
Model: EDF701007
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2023 Edifier International Limited. All rights reserved.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO., LTD.
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown on this manual may be slightly different from actual
product. If any difference is found, the actual product prevails.
7.1 SURROUND GAMING SPEAKERS
Quick Start Guide
Double-side 
adhesive tape
USB Power Plug
Input: 5V
2s
Power on/off
x1
Input mode switch (USB-A/Bluetooth)
x2
Disconnect Bluetooth
x1
Volume down
2s
Volume down gradually
x1
Volume up
2s
Volume up gradually
x1
Sound mode switch (Music/Game/Movie)
2s
Light effects on/off
x2
Light effects switch
Brand
card
1A
•Select "HECATE G1500 BAR" in your
device setting to connect.
•The " " icon is steadily lit in blue.
•Switch to USB-A input mode and
plug the USB port into the audio
source.
•The "
" button twice, then try again.
Brand
sticker
Setting
Bluetooth
Bluetooth
My Device
HECATE G1500 BAR
" icon is steadily lit in blue.

Publicidad

loading

Resumen de contenidos para HECATE G1500 BAR

  • Página 1 Installation of the sound effect adjustment software •Please log in HECATE home page website: www.hecategaming.com to download software of G1500 BAR, find the "setup.exe" file, and install the HECATE software (Windows 10 or later systems supported); •Please follow the instructions to complete the installation.
  • Página 2 Installation du logiciel de réglage des ef fets audio •Rendez-vous sur la page d'accueil de HECATE: www.hecategaming.com  pour télécharger le logiciel G1500 BAR, trouvez et exécutez le fichier «setup.exe», et installez le programme HECATE (Systèmes Windows 10  ou ultérieurs pris en charge) ;...
  • Página 3 Instalación del software de ajuste de efectos de sonido •Acceda al sitio web de HECATE: www.hecategaming.com para descargar el software de G1500 BAR, localice el archivo "setup.exe" e instale el software HECATE (Sistemas Windows 10 o posteriores soportados); •Siga las instrucciones para finalizar la instalación.
  • Página 4 Die Installation der Software zur Anpassung der Klangeffekte •Melden Sie sich auf der HECATE-Homepage an: www.hecategaming.com und laden die Software von G1500 BAR herunter. Suchen Sie die Datei „setup.exe“ und installieren die HECATE-Software (Windows 10 oder neuere Systeme werden unterstützt);...
  • Página 5 Installazione del software di regolazione effetto suono •Accedere al sito web di HECATE: www.hecategaming.com per scaricare il software di G1500 BAR, trovare il file "setup.exe" e installare il software HECATE (Sono supportati i sistemi Windows 10 o successivi); •Seguire le istruzioni per completare l'installazione.
  • Página 6 Instalação do software de ajuste de efeito sonoro •Inicie sessão no website HECATE: www.hecategaming.com para transferir o software de G1500 BAR, localize o ficheiro "setup.exe" e instale o software HECATE (Compatível com Windows 10 ou sistemas posteriores); •Siga as instruções para concluir a instalação.
  • Página 7 マイクロフォンジャック マイクのミュート/アンミュート 両側粘 ブラン ブランド 着テープ ドカード ステッカー 電源接続 USB電源プラグ 入力: 5V Bluetooth モード Setting Bluetooth Bluetooth My Device HECATE G1500 BAR Bluetoothモード切り •接続設定するデバイスで「HECATE 替えると、「 」は青 G1500 BAR」を選択します。 で点滅します。 • 「 」アイコンは、接続後に青で点 灯します。 USB-A入力モード USB-A入力モードに切 •USB-A入力モードに切り替え、USB り替えます ポートをオーディオソースに接続し ます。 •"...