Pitney Bowes DL250 Manual De Instrucciones página 3

Introduction
General Information
The letter opener DL 250 is a machine constructed for the office environment.
User Information
• The letter opener DL 250 is only intended for opening envelopes. Any other use
is not according to it's specifications. The manufacturer/supplier is not liable for
any damage resulting from misuse.
• Please refer to this guide for instructions on use.
• The DL250 can be placed onto a tabletop with no special requirements. It's
maximum operating time is 40 minutes.
Safety Instructions
Please refer to the Safety document provided with your Letter Opener for safety
considerations and information.
Your Letter Opener
Please read this operator guide carefully to ensure effective and secure
handling of your letter opener.
Adjustment of
cutting width
Top Cover
On/Off
Envelope
Guide
SDC2008A DL250 Operator Guide
Room for
Waste
Receiving
Tray
Transport Belts
The connection for
the power supply is
positioned underneath
the DL250
Setup
Unpacking/Storing
It is recommended that you retain all packaging for your DL250 for future use if
required.
Caution! The housing of the letter opener must only be opened by a skilled
technician to avoid damage.
Setup
DL250
Connect the machine to the power supply.
Preparing Mail
Caution! Foreign objects can damage your machine.
1. Remove any foreign objects from your mail (i.e. Paper clips, staples or rubber
bands).
2. Turn and Tap envelopes to move content away from edge to be opened.
3. Sort your mail, depending on size and type/quality of envelope.
4. Arrange envelopes with opening side aligned evenly and place against the rear
of the envelope guide plate.
EN
Table Top
Stacker Tray
<< Return to Contents