Lindy 38313 Manual De Usuario página 4

User Manual
Product Diagram & Installation
Front Panel
1. IR Window
2. Power – This LED will illuminate green when the unit is switched on or red when on standby
3. Output 1 – The LED of the active Input will light green
4. Output 2 – The LED of the active Input will light green
5. Output 1 Button – Push the Out A button to switch between Input 1 and Input 2
Output 2 Button – Push the Out B button to switch between Input 1 and Input 2
6. EDID Dip Switch – Use the Dip Switch to set the EDID
7. Service – Micro-USB Port for Firmware Updates
Rear Panel
8. Input 1 / 2 – Connect to a HDMI source device
9. Output 1 / 2 – Connect to a HDMI display
10. TosLink (Optical) – Connect to a TosLink (Optical) audio device and extract digital audio from
Output 1
11. 3.5mm – Connect to 3.5mm audio device and extract audio from Output 1
12. DC 5V – Connect the PSU to power the device
Installation
•
Please ensure all devices are switched off before making any connections.
•
Connect the source devices such as a PC, Blu-ray player or games console to the HDMI matrix
input ports. Then connect the high definition displays to the HDMI matrix output ports. When all the
connections are made, connect the power supplies.
•
Once all the connections have been made, switch on the devices in this order: displays, HDMI
Matrix, source devices. Please allow a few minutes for the devices to handshake and for the
signals to appear.
•
After changing EDID settings, please power cycle the matrix first. The setup will then use the
adjusted EDID settings.
English