Lindy 43382 Manual De Usuario página 6

User Manual
Read and Write Access to SSDs* (no cloning)
Please connect the included power supply and the USB Type C cable to the USB 3.2 Dual M.2 NVMe
SSD Enclosure. The operating system will install necessary drivers automatically and the Enclosure is
now ready for use.
Reading of and writing on two SSDs simultaneously is supported.
Before unplugging the USB 3.2 Dual M.2 NVMe SSD Enclosure make sure data transfer processes are
completed to avoid data loss.
LED Indicators (from top to bottom)
Power Indicator: lights up in green when the power is on.

M.2 NVMe SSD Indicators: Light up in yellow when the M.2 NVMe SSD is inserted, flickers while

reading and writing; the indicator is off in sleep mode.
Offline Clone Progress Indicators:

Light up in blue when offline cloning is in progress: 25% > 50% > 75% > 100% flicker

in turn, all 4 indicators light up when the clone process is finished;
The LED of disk A flickers to report an error while the storage capacity of target disk

(disk B) is less than source disk (disk A) during offline cloning.
*If you are using a new M.2 SSD, it must first be initialized, formatted and partitioned.
English