Manuales relacionados para Truper CLNE-23
Resumen de contenidos para Truper CLNE-23
- Página 1 Manual Pneumatic brad nailer Applies for: Code Model 13179 CLNE-23 CLNE-23 WARNING Constant lubrication. Read this manual thoroughly CAUTION before using the tool.
- Página 2 Warranty policy Use and care recommendations Do not operate without lubrication (it is recommended to use the Truper lubricating filter 19238 UNI-LL-1/4). Use only in WOOD. Work at the INDICATED PRESSURE to prevent the nail from cloging. In case this happens REMOVE THE STAPLE before continuing working.
- Página 3 Technical data CLNE-23 Code 13179 Description Pneumatic brad nailer Recommended Operation Pressure 75 PSI - 110 PSI Maximum Pressure Allowed 110 PSI Cartridge Capacity 100 nails Nail Gauge Nail Length 15/32” to 1-3/16” Air Intake Connection 1/4 NPT Hose Inner Diameter 3/8”...
- Página 4 Safety warnings for pneumatic tools Keep your work area clean, tidy and well lit. Disconnect the air hose from the tool before servicing or changing accessories. CAUTION Cluttered and dark areas can cause accidents. CAUTION To prevent the tool from accidentally start and cause Never use the tool in explosive environments or in the accidents.
- Página 5 Risk control when using pneumatic tools Injury risk to head and eyes Prevent injury to head and eyes WARNING • Compressed air used with pneumatic • When operating pneumatic equipment wear tools may be dangerous. Objects like vices, burr, splinters, protecting eyeglasses complying with ANSI Z87.1 dust and other residues can get shot out at great speed Standard.
- Página 6 Safety warnings for using air nailers Before using the nailer • To prevent possible injuries, the operator and any other person in the work area shall wear safety glasses with side protection as well as protective helmets in compliance with the Official Mexican Standards (NOM).
- Página 7 Parts Handle intake Cartridge Trigger lock Nails cartridge Start Up Air Supply Connection • Before connecting to the tool, connect the hose to the compressor and let some air run through the hose and coupling, to verify both are clean. •...
- Página 8 Start Up Operation • Turn on the compressor and fill it. • Regulate the air compressor output pressure to 75 PSI and 110 PSI WARNING The tool operates with this pressure range. If operating with a higher pressure ranges the useful life of the tool will be decreased.
- Página 9 Maintenance Lubrication Service • Pneumatic tools require constant lubrication all along • Servicing the tool shall be carried out every 3 months in a their working life and while operating. The compressed air Authorized Service Center. the tool needs to function contains humidity that can Maintenance service carried out by a non-qualified person oxidize the tool’s motor and bearings.
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 It includes the costs of transportation of the product that derive from its fulfillment of its service network. . Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.