Sound Town CARPO-L1 Manual De Usuario página 4

OPERATIONS
2
3
4
5
6
7
8
9
10
11
20
1
12
13
14
15
16
17
18
19
21
(4)
OPERATIONS
1. MP3 Player
MODE Long press to turn on/off the MP3 module,
short press to Interchange between USB/SD/Bluetooth mode
Play/Pause
Repeat
Previous Song
Next Song
BT PAIR TWS bluetooth pairing function to pair the other speaker
2. EFFECT 1: To adjust the echo of channel 1
3. EFFECT 2: To adjust the echo of channel 2
4. LEVEL 1: To adjust the input level of channel 1
5. LEVEL 2: To adjust the input level of channel 2
6. Switch Mic or Line input for channel 1 (for both 1/4" and XLR input)
7. Switch Mic or Line input for channel 2 (for both 1/4" and XLR input)
8. 1/4" Jack input for channel 1
9. 1/4" Jack input for channel 2
10. XLR input for channel 1
11. XLR input for channel 2
12. POWER LED: Illuminated when unit is on.
13. LIMIT LED: Lights up when the amplifier is near clipping. An occasional flickering is acceptable
If LED is lit continuously adjust the level control and reduce the output level of connected sources.
Failure to do so may lead to premature failure of your speaker.
14. MASTER VOLUME: Adjust the overall volume of the system.
15. Adjust to boost or cut the low frequency (around 80Hz), it's recommended to cut the bass (turn
counter-clockwise) when use the unit in speech venues, while boost the bass (turn clockwise)
when use the unit in DJ events.
16. LEVEL 3: To adjust the input level of channel 3 (AUX input or MP3 input).
17. Switch AUX (1/8" Jack) or MP3 input for channel 3.
18. 1/8" Aux input
19. XLR mix output to link out signal to another amplifier or another powered speaker.
20. Power Switch: To turn on/off the unit.
21. IEC input: To connect the included IEC power cable. (Support 100V~240V)
(5)