Descargar Imprimir esta página

Admiral AAW-05CR1FHU Manual De Uso Y Mantenimiento página 16

Ocultar thumbs Ver también para AAW-05CR1FHU:

Publicidad

Idiomas disponibles

Idiomas disponibles

WAC
5
6
8
USER
MAN
final
3/2/05
12:23
PM
Page
i_
CAREAND MAINTENANCE
When servicing
the air conditioner,
be sure to
turn the mode switch to the "OFF" position and
disconnect
the power cord from the electrical
outlet.
1. DO NOT use gasoline,
benzine, thinner or
other chemicals
on the air conditioner
as these
substances
may cause damage to the paint finish
and deformation
of plastic parts.
2. Never attempt to pour water directly in front
of the unit as this will cause deterioration
of
the electrical
insulation.
DO NOT forget to install the air filter.
If the air
conditioner
is left to operate without the air filter,
dust is not removed from the room and may
cause your air conditioner
to fail.
When the air filter inlet grill and cabinet are dirty,
wipe with lukewarm
water (below 104°F).Use
of
mild detergent
is recommended.
Cleaning
the Air Filter
If the air filter becomes clogged with dust, air-flow
is obstructed
and reduces efficiency.
The air filter
should be cleaned once a month. More frequent
cleaning may be necessary
depending
on outdoor
and indoor air quality.
Air Filter Removal
The air filter on the above models is located
behind the air intake front grill.
To remove the air filter, grasp the filter handle(tab)
located on the up (center) side of the air inlet grille
and slide the air filter to the up.
To reinstall the air filter, reverse the above
procedure.
Cleaning
of Air Filter
1. Remove dust clogged in the filter by
tapping it or vacuum clean it.
2. Wash the filter well with lukewarm
water below
40°C (104 °F) while rubbing lightly. To get better
results, wash it with soapy water or a neutral
cleaning agent.
3. Rinse the filter well using clean water then
dry completely.
End-of-Season
Care
1. Operate the fan alone for half a day to dry out
the inside of the unit.
2. Turn off power and remove plug from wall socket.
3. Clean filter.
4. Store in a dry location.

Publicidad

loading