Publicidad
Idiomas disponibles
Idiomas disponibles
Proper footing and balance enables better
control of the tool in unexpected situations.
●
Do not use on a ladder or unstable supports.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
●
Make sure the hose is free of obstructions or
snags.
Entangled or snarled hoses can cause
loss of balance or footing and may become
damaged, resulting in possible injury.
●
Do not overreach. Keep proper footing and
balance at all times.
Proper footing and
balance enables better control of the tool in
unexpected situations.
●
Do not attach the hose or tool to your body.
Attach the hose to the structure to reduce the risk
of loss of balance if the hose shifts.
●
Always assume that the tool contains
fasteners. Do not point the tool toward
yourself or anyone whether it contains
fasteners or not.
●
Wash hands after handling.
This product or its
power cord may contain chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm.
TOOL USE AND CARE
WARNING:
!
Disconnect the tool from the air source
before making adjustments, doing tool
maintenance, clearing jams,
touching the
safety yoke,
leaving work area, or
unloading the tool. Such precautionary
measures reduce the risk of injury to
persons.
●
Know this tool. Read manual carefully, learn its
applications and limitations, as well as the
specific potential hazards related to this tool.
●
Use only fasteners that are recommended
for your models.
Do not use the wrong
fasteners or load the fasteners incorrectly.
●
Use only accessories that are identified by
the manufacturer for the specific tool model.
Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of
injury.
04
●
Use only those fasteners recommended for
use with this tool. Fasteners not identi ed for
fi
use with this tool by the tool manufacturer are
able to result in a risk of injury to persons or tool
damage when used in this tool.
●
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool's
operation.
If damaged, have the tool serviced
before using. Many accidents are caused by
poorly maintained tools.
●
Maintain tools with care.
Keep tool clean. A
properly maintained tool, reduces the risk of
binding and is easier to control.
Store tools out of the reach of children and
●
other untrained people.
Tools are dangerous
in the hands of untrained users.
Check operation of the tool before use.
●
not use the tool if the workpiece contact
mechanism is not working correctly as accidental
driving of a fastener may occur.
Do not use tool if trigger does not actuate
●
properly.
Any tool that cannot be controlled with
the trigger is dangerous and must be repaired.
●
Do not force tool.
Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Use clamps or another practical way to
●
secure and support the workpiece to a stable
platform.
Holding a tool by hand or against the
body is unstable and may lead to loss of control.
●
Keep the tool and its handle dry, clean and
free from oil and grease.
Always use a clean
cloth when cleaning. Never use brake fluids,
gasoline, petroleum-based products, or any
strong solvents to clean your tool.
●
Do not use the tool as a hammer.
●
Never use this tool in a manner that could
cause a fastener to be directed toward
anything other than the workpiece.
●
Never use gasoline or other flammable
liquids to clean the tool.
Never use the tool in
the presence of flammable liquids or gases.
Vapors could ignite by a spark and cause an
explosion which will result in death or serious
personal injury.
●
Do not remove, tamper with, or otherwise
cause the trigger lock or trigger to become
inoperable.
Do not operate any tool which has
been modified in a like fashion. Death or serious
personal injury could result.
●
Do not touch the trigger unless driving
fasteners.
Never attach air line to tool or carry
tool while touching the trigger. The tool could
eject a fastener which will result in death or
serious personal injury. Also actuate the trigger
lock to the safe position when not in use.
●
Always fit tool with a fitting or hose coupling
on or near the tool in such a manner that all
compressed air in the tool is discharged at
the time the fitting or hose coupling is
disconnected.
Do not use a check valve or any
other fitting which allows air to remain in the tool.
Death or serious personal injury could occur.
Never place hands or any other body parts in
●
the fastener discharge area of the tool.
tool might eject a fastener and could result in
death or serious personal injury.
Do
●
Never carry the tool by the air hose or pull
the hose to move the tool or a compressor.
Keep hoses away from heat, oil and sharp
edges. Replace any hose that is damaged, weak
or worn. Personal injury or tool damage could
occur.
●
Always assume the tool contains fasteners.
Respect the tool as a working implement; no
horseplay.
●
Always keep others at a safe distance from
the work area in case of accidental discharge
of fasteners.
Do not point the tool toward
yourself or anyone whether it contains fasteners
or not. Accidental triggering of the tool could
result in death or serious personal injury.
●
Do not drop or throw the tool.
throwing the tool can result in damage that will
make the tool unusable or unsafe. If the tool has
been dropped or thrown, examine the tool closely
for bent, cracked or broken parts and air leaks.
STOP and repair before using, or serious injury
could occur.
●
Avoid using the tool when the magazine is
empty.
Accelerated wear on the tool may occur.
●
Clean and check all air supply hoses and
fittings before connecting the tool to an air
supply.
Replace any damaged or worn hoses or
fittings. Tool performance or durability may be
reduced.
●
Do not use the tool if it leaks air or does not
function properly.
●
Do not operate the tool if it does not contain
a legible warning label.
Always carry the tool by the handle. Never
●
carry the tool by the air hose.
TOOL SERVICE
●
Use only accessories that are identified by
the manufacturer for the specific tool model.
●
When servicing a tool,
parts or failure to follow maintenance
instructions may create a risk of injury.
●
Use only the lubricants supplied with the
tool or specified by the manufacturer.
●
Tool service must be performed only by
qualified repair personnel.
The
OPERATION
●
Do not drive fasteners near edge of material.
The workpiece may split causing the fastener or
ricochet, injuring you or people around.
●
Do not carry the tool from place to place
holding the trigger. Accidental discharge
could result.
Choice of triggering method is
important. Check manual for triggering options.
●
During normal use the tool will recoil
immediately after driving a fastener.
normal function of the tool. Do not attempt to
prevent the recoil by holding the tool against the
work. Restriction to the recoil can result in a
second fastener being driven from the tool. Grip
Dropping or
the handle firmly and let the tool do the work.
Failure to heed this warning can result in serious
personal injury.
●
Do not drive fasteners on top of other
fasteners or with the tool at an overly steep
angle as this may cause deflection of
fasteners which could cause injury.
●
Do not actuate the tool unless you intend to
drive a fastener into the workpiece.
●
Always handle the tool with care:
◆Respect the tool as a working implement.
◆Never engage in horseplay.
◆ Never pull the trigger unless nose is directed
toward the work.
◆ Keep others a safe distance from the tool
while tool is in operation as accidental
actuation may occur, possibly causing injury.
use of unauthorized
This is a
05
Publicidad
