Descargar Imprimir esta página

Brandt B3228HD LED Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Warnings
Mains Supply
This television is designed to operate from a 100-240 Volts 50/60Hz AC mains
supply. Other power sources may damage it. Check that the rating plate (on the
back cover of the television) states 100-240V~ before you plug it in for the first
time. The manufacturer accepts NO liability for damage or injury caused by using
the product with the wrong mains voltage.
Dangerous voltage
constituting a risk of electric
shock is present inside this
equipment.
This mark is applied to show
the equipment conforms to
European safety and
electro-magnetic
compatibility standards.
Safe use and care of your television
We have designed and made this television to meet European Safety Standards, but
as with any electronic equipment you must take care to stay safe and get the best
results. Here is some good advice to help you do this. Read these instructions
carefully before you try to use the television.
Protect the mains lead. You must ensure the mains lead cannot be walked on,
crushed, chafed, cut or trapped.
Switch off the mains power or pull out the mains plug when you leave the television
unattended, unless the function of the television requires a continuous power supply.
Do not continue to use your television if you have spilt liquids in it, if it is damaged in
any way or if it does not work normally. Immediately unplug the television and get
expert advice.
This equipment is double
insulated and an earth
connection is not required.
There are important
operating and maintenance
instructions in the literature
accompanying this
equipment.
2

Publicidad

loading