sunjoe 24V-SS12-BDL Manual De Instrucciones

TM
OPERATOR'S MANUAL
A Division of Snow Joe, LLC
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions before using this cordless snow shovel.
Basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
General Safety
You and any other operator of this snow shovel must read,
understand and follow these instructions in their entirety, and
should reread them at the start of each snow season. Failure
to follow these instructions may result in ELECTRIC SHOCK,
FIRE and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION and
AWARENESS.
m
When using the power tool, basic safety
WARNING!
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury. These include:
• Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
• Use the right product – Do not use this machine for any
job except that for which it is intended.
• Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cord immediately on the charger.
Do not use on gravel surfaces unless the snow shovel
is adjusted for such surfaces in accordance with the
operator's manual.
• Keep children, bystanders and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
• Dress properly – Do not wear loose articles of clothing or
jewelry. They can become caught in moving parts. Wear
rubber boots.
• Avoid accidental starting – Make sure the safety switch
and the on/off switch are in the off position before
inserting the battery in the unit. Do not carry the cordless
snow shovel with the safety switch and the on/off switch
engaged.
Original instructions.
© 2023 Snow Joe, LLC. All rights reserved.
CORDLESS SNOW SHOVEL
R
24V MAX* | 4.0 Ah | 12-INCH
Model 24V-SS12-BDL
m
used in this
• Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
•
m CAUTION! Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
• Use safety glasses – Also use safety footwear,
snug‑fitting clothing and gloves.
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the cordless snow shovel when you
are tired or under the influence of alcohol or drugs.
• Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
• Do not overreach – Keep proper footing and balance at
all times.
• If the cordless snow shovel strikes a foreign object, follow
these steps:
i. Stop the cordless snow shovel. Remove the battery.
ii. Inspect for damage.
iii. Repair any damage before restarting and operating the
snow shovel.
• Disconnect the tool – Turn off the power switch and
remove the battery when it is not in use, before servicing
it, when changing accessories and when performing any
other maintenance task.
• Store idle tool indoors – When not in use, the cordless
snow shovel should be stored indoors in a dry, locked
place out of the reach of children.
• Maintain the cordless snow shovel with care – Follow
the applicable maintenance instructions for replacing parts
and changing accessories. Lubrication is not required.
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to assemble the best
possible battery packs.
Despite all the safety precautions, caution must always be
*Initial no-load voltage, when fully charged, peaks at
1
Form No. SJ-24V-SS12-BDL-880E-M
24V; nominal voltage under typical load is 21.6V.
SAVE THESE INSTRUCTIONS
EN