Roper 7RAX5133 Manual De Instalación, Uso Y Cuidado página 6

5. Turn the Water Temperature Selector
to the setting that corresponds with
the type of fabric and soils being
washed.
l
Select any one of three wash-rinse
temperature combinations: cold-cold,
wam+cold, and hot-cold.
l
The top temperature is the wash water
and the bottom temperature is the rinse
water.
l
See page 13 for water temperature
guidelines.
6. Push in and turn the Cycle Control
Knob clockwise. Stop when the Indica-
tor on the outer rlng points to the
number in the wash cycle you want.
l
The numbers are minutes of wash time.
l
The cycles are described on page 7.
Stopping/restarting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
l
To
stop
the washer at any time, push in
the Cycle Control Knob.
l
To restart the washer, close the lii (ii
necessary) and pull out the Cycle
Control Knob.
6