Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
a4
Memory indicator
The indication AM used here
includes both MW and LW.
Tape indicator
A
¢
J
1 Switch ON the power.
tuminated.
If the tape indicator is illuminated, press this switch.
Turn the tuning control so as to tune to the
desired broadcast.
1
"Az —
Press the memory button momentarily.
(The memory indicator will illuminate.)
Note:
If the
memory
button
is pressed
and
held
until
the
frequency
begins
to
change,
the
automatic
memory
presetting (Refer to page 16.) is activated. To stop the
automatic
memory
presetting,
once
again press
the
memory button. Then begin again from step 7.
To cancel the memory function, press the memory button
again.
Select the desired "CHANNEL".
To designate channels 1—9:
Press the appropriate (1—9) preset-tuning button.
To designate channels 10-30:
@ Press the button for the most significant digit (1, 2 or 3).
@ Press the button for the least significant digit (1—0)
within 2 seconds after pressing the first button.
Note:
If the interval between pressing the first button and press-
ing the second button is more than about 2 seconds, the set-
ting may not be made correctly. If this happens, make the
setting once again (following step 8).
Repeat steps 5 through 9 to make additional
memory
presettings;
for later reference,
note the presettings in the station memory
file on page 18.
Publicidad
