Asko HPS533S Instrucciones De Uso página 5

CLICK
Lift the washing machine or dryer and place it over the
6
pedestal drawer.
Place the pedestal drawer and make sure it is aligned with
WM (washing machine) or TD (tumble dryer).
Remove the rubber caps.
7
Then, replace the drawer (see steps 10 and 11) and make
sure the washing machine and dryer are level. Adjust their
position if necessary.
When the position is set, remove the pedestal drawer.
Attach the nuts to all four spacers on the washing
8
machine or dryer, and tighten them with an open
spanner (17 mm).
Replace the pull-out shelf.
9
10
11
into place.
12
conditioner). After use, close the pedestal drawer.
We reserve the right to modifi cations.
Pull out both guides and place the pedestal drawer
onto the guides.
Use the plastic stops under the guides to pull the
guides towards you until you hear the guides "CLICK"
The pedestal drawer can be used at storage space
for a variety of objects (e.g. washing detergent or
5