Publicidad
Idiomas disponibles
Idiomas disponibles
AUTO WHITE BALANCE (AWB)
There are AUTO and HOLD in the white bal-
ance adjustment in this camera. The white bal-
ance is adjusted automatically to provide the
optimum picture just by setting the white bal-
ance selection switch to the AUTO. When you
do not obtain the optimum white balance in
AUTO, HOLD is used. At #5 switch of DIP
Switch.
Left side: HOLD
Right side: AUTO
(Factory setup is AWB AUTO.)
CAUTION:
This function is color mode only.
En-16
SYNCHRONIZATION MODE (SYNC)
LINE LOCK MODE
(The camera using the 24VAC power supply)
This mode allows the camera to use the phase
of the AC power as the reference.
When attempting to phase a group of cameras
together deviation from the AC power phase
may be required.
This can be done with the phase adjustable Line
Lock control.
(For the phase adjustment, refer to "L.L.
ADJUSTER".)
INTERNAL MODE
(The camera using the 12VDC power supply)
In this mode, an inside crystal oscillator is used
as INT. Sync Generator.
The synchronization mode can be selected by
moving #6 switch of DIP Switch right and left .
The meaning of switch is as follows,
Left side: Auto mode(DC: Internal, AC: Line
Lock)
Right side: Internal mode
(Factory setup is SYNC AUTO.)
Publicidad
