Publicidad
POWER SYMBOL
6
As soon as the DIO 04 is supplied with voltage, the starting process begins. During the start-up
process, the white power symbol flashes and the line outputs OUTPUT 1 to 4 are muted.
When the start-up process is completed after a few seconds, the symbol lights up permanently
and the unit is ready for operation.
SIGNAL OUTPUT 1 – 4
7
Two-colour illuminated digits 1 to 4 for signal detection and clip display.
OUTPUT: As soon as an audio signal with sufficient level is present at an output channel, the
corresponding digit lights up white. As soon as one of the digits lights up red, the corresponding
output stage is operated at the distortion limit. In this case, reduce the level on the source player
so that the digit no longer lights up red.
AIR VENTS
To prevent damage to the device, do not cover the ventilation openings on the left and right
sides and on the top and bottom of the device and ensure that air can circulate freely. Covering
the ventilation openings on the top or bottom of the enclosure when mounting it underneath
or on top of a table is not critical, as the cooling provided by the ventilation openings on the
remaining sides is sufficient.
Tip: Preferably use balanced audio cables for wiring analogue line inputs and outputs.
CONNECTION EXAMPLES
1
Dante® Controller
Questra
ON
ON
DIP
DIP
1 2
2
3 4
3 4
ON
DIP
ON
DIP
1
2
3
4
1
2
3
4
Ethernet Switch
24V DC
Power supply
9
Publicidad
