Zafferano poldina Instrucciones De Uso página 3

poldina
Cordless Table lamp with Rechargeable Battery
LD0340B4 white
4.3"
LD0340N4 dark grey
11cm
LD0340R4 rust
LD0340A4 blue
LD0340G4 sage green
LD0340P4 pink
LD0340M4 dark green
LD0340S4 sand
LD0340F4 red
LD0340X4 bordeaux
LD0340D4 black
LD0340Y4 steel blue
LD0340U4 ruby red
*LD0340O4 gold
*LD0340C4 chrome
*LD0340BFA silver leaf
*LD0340BFO gold leaf
*LD0340RFR copper leaf
*Not suitable for outdoor use.
INCLUDED
3.9 x 3.9"
10 x 10cm
This product contains a class F light source
1. Tips for use:
This product is exclusively for lighting purposes and:
A) It must not be exposed to heavy mechanical loads or contamination; B) It can be installed and used only after checking the state of the pro-
duct; check that is not dirty and has not been damaged during storage; C) Installation and maintenance must be carried out when the appliance
is switched off; D) Any alterations to the product, any tampering and any failure to comply with the instructions provided may make the appliance
hazardous; E) When fully assembled, the lamp (head+structure, without the recharging base), reaches an IP65 rating, making it ideal
for outdoor use. The light fixture (top) alone and the assembled lamp placed on the recharging base has an IP20 rating, making it unsuitable for
outdoor use; F) All metal and plastic surfaces should be cleaned with a soft dry cloth; G) The company Zafferano shall not be held liable for any
damage caused due to its products being assembled in any manner that does not comply with the instructions provided.
2. Technical data of the lamp:
- Power: 2.2 W
- Volt: DC 5 V
- Color temperature: 2200 - 2700 - 3000 K
- Lumen lamp: 234-251-256 lm
- Lithium battery pack included (see section accessories included); for instructions about how to replace the battery pack, please consult the
website: www.zafferanoitalia.com. Use only original batteries for replacement.
- Charge: 6/7 h
- Battery life: 12 h
- Class: III
- Protection rating: IP65
- CRI>80
3. Battery charger technical data:
- Contact charging base: INPUT/OUTPUT 5Vdc - 1A; cavo USB 1.2 Mt.
- Charger: INPUT AC100-240V 50/60Hz; OUTPUT 5Vdc- 1A.
- The lamp works correctly even when connected to the charging base.
- It is advisable to use the original charger and charging base. Alternatively, you can use a certified 1A max. charger.
4. Important:
- The versions with a metal leaf finish are handmade and protected by a clear varnish. We recommend cleaning using only a soft, dry cloth. The use of
aggressive cleaning agents or abrasive cloths, and any accidental knocks, may damage the delicate leaf finish.
- The support surface for the lamp must not exceed a 15° tilt or it will fall.
- The battery has an overload protection function.
- To preserve the integrity of the battery, we recommend keeping the charge between minimum 20% and maximum 80%; if the lamp is not used for
long periods, it is advisable to regularly charge/discharge the product.
- Please refer to local laws for the proper disposal and recycling of the battery.
DESIGNED IN ITALY BY ZAFFERANO SRL, MADE IN PRC • Imported by Zafferano America LLC, 301 Penhorn Avenue Suite 5 Secaucus, NJ 07094, USA •
Visit our website for additional information and latest updates on our products • www.zafferanoamerica.com
3
LED DIMMER
2.2W LED • 234-251-256 lm • 2200-
2700-3000K • IP65
• 100-240V
50/60Hz • CRI>80 • 5Vdc max 1A
w 4.3" x h 14.9" / Ø 11 x h 38 cm
NOT INCLUDED
LD0350RP
Multi-contact
charging base (max. 6 pc)
LD0340RA
Multi-socket USB
charger (8xUSB)
BAT04703706701900
Replacement battery pack
KIT00009006800200
Single-contact
Replacement LED board
charging station
INSTRUCTIONS FOR USE
SWITCHING ON / SWITCHING OFF / DIMMING
Quick taps to:
- turn on
- turn off the lamp
<1 sec <1 sec
COLOR TEMPERATURE CONFIGURATION
4 sec
<1 sec
2200K
When the lamp is switched off, press Quick tap on the touch sensor
lightly for 4 seconds until a steady blue to change the color temperature
LED lights up of the lamp
INDICATOR LEDS
PERMANENT RED LED
FLASHING RED LED
the battery charge is lower than 20%, charging in progress
charging is recommended.
When the charge is depleted (1%), the lamp
does not switch on but emits three white flashes
as an alert to charge
Charge the battery before initial use.
To correctly charge the lamp, we recommend that you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug from the electrical socket
DESIGNED IN ITALY BY ZAFFERANO SRL, MADE IN PRC • Imported by Zafferano America LLC, 301 Penhorn Avenue Suite 5 Secaucus, NJ 07094, USA •
Visit our website for additional information and latest updates on our products • www.zafferanoamerica.com
When the lamp is switched on, press and hold the touch sensor
to obtain the desired brightness. Every time you turn it on, the
light intensity returns to 100%
4 sec
<1 sec <1 sec
2700K 3000K
Light pressure for 4 seconds to set
the new color temperature and switch off
the lamp
PERMANENT GREEN LED
the battery is 100% charged,
disconnection from the power charger
is recommended
4