Publicidad
Idiomas disponibles
Idiomas disponibles
4. Remove 1 hex head bolt from each side with a
socket wrench (10 mm).
5. Lift up the Flex door from the rails.
RE-ASSEMBLING THE FLEX
DOOR
To reattach the flex doors, assemble parts in
reverse order.
CAUTION
Be sure to connect the Flex Door Wire Connector.
If it is not connected, the Flex Room does not
work.
DA68-02952B-04.indb 13
DISASSEMBLING THE
FREEZER DOOR
1. Take out the upper drawer by lifting it up.
2. Remove the freeze room guard ( 1 ) by lifting
the guard up.
3. Take out the lower basket ( 2 ) by lifting the
basket up from the rail system.
CAUTION
You can scratch the side of the bin if you twist it
left or right when disassembling or re-assembling
it.
4. Press the fixing hook of the rail system.
English - 13
( 1 )
( 2 )
2016. 3. 30.
1:32
Publicidad
