Remote connection
The smartphone is connected to the 4HEATmodule via data network provided by the user's own telephone operator or via different Wi-Fi
network.
The smartphone triangulates with the cloud server to reach the 4HEAT module.
The dial-in times vary depending on traffic data network and the traffic to the server, reaching a worst case scenario delay of 5 minutes.
The remote connection mode can be used if the user is registered to the cloud server.
module
1. INTRODUCTION
The KIT WIFI2-B module that you have purchased allows you through the 4HEAT application to remotely monitor and manage the pellets products from
Boreal with a smartphone, as long as you have an internet connection.
The main functions of the application are:
-
Turning the stove on and off
-
Checking the condition of the stove in real time.
-
Adjustment of working power (only if your Smartphone is connected to the same wireless network as the 4HEAT module).
-
Adjustment of the temperature of the water (Hydro appliances).
-
Program the chronothermostat.
-
Current temperature detected by the stove.
-
Choose language.
2. MODULE STRUCTURE
The KIT WIFI2-B module is composed of three main elements:
-
KIT WIFI2-B module: device that connects the electronic stove card with the local wireless router.
-
Data Server: Web infrastructure that allows data to archive and act as the main point of the remote communication.
-
Aplication 4HEAT: mobile application which allows the user to interact with the stove.
The module includes:
3. TECHNICAL DETAILS
Communication Port
Power supply
Material of the parts
Working temperature
Fixing
4. OPERATION OF THE LEDS
The following image shows the LEDs that make up the module:
The meaning of the LEDs is as follows:
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
3
delay 2 min
delay 1 min
2
Wifi Module
2 Screws
RS232
5 V
Made of ABS
Between -20 ºC and 60 ºC
Fixing 3,5 mm self-tapping screws
4
delay 0 ms
delay 0 ms
1
Interconection Cable
Dimensions:
70 mm
A
B
C
11
Charger
D
64 mm
E
REMOTE CONTROL WIFI2-B MODULE
EN