Publicidad
Idiomas disponibles
Idiomas disponibles
DUST
BOX
(Fig. 7)
_WARNING
= Do not use the
dust box when sanding metal.
Using the dust box when sanding
metal creates a fire hazard, which
could damage the tool and lead to
serious personal injury.
Your belt sander
is supplied
with
a dust box to help you keep the
working
area clean. The dust box
is ideal for smaller jobs.
To install=
1.
Disconnect
the sander from
the power source.
2.
Align the rib on the
dust-exhaust
port with the
groove on the dust box.
3.
Slide the dust box onto the
port as far as possible.
Fig. 7
Dust Box
Dust-exhaust
port
Groove
NOTICE: From time to time, clean the dust=exhaust
port with a dry brush.
TO Femove:
1.
Disconnect
the sander from the power source.
2.
Grip the dust box firmly, and pull it out from the tool.
NOTICE:
For Bonger periods of use, or on Barge pieces of work, it is advisable
to
use a suitable
vacuum cleaner. Attach a 1=1/4 in. wet/dry=vacuum
hose to the
dust=exhaust
port. it is advisable
to also wear a suitable
dust mask, as there
may be residual airborne
dust particles in the area.
_,
WARNING:
The dust that is produced
while sanding
can be detrimental
to
health, flammable,
or explosive.
Suitable safety measures
are required.
Example:
Some types of dust are known to cause cancer. Always wear a dust mask and
use the proper dust collection
method: dust box for small volumes
and vacuum
connection
for large volume dust collection.
15
Publicidad
