Enjoy your new ZASSENHAUS digital coffee scale EXPERT. Read the instructions carefully prior
to using it for the first time and keep them for future users.
IMPORTANT INFORMATION
This appliance is intended for domestic use only. Improper use, application or insufficient cleaning
and care can impair safety and result in danger for the user. ZASSENHAUS cannot accept any
responsibility for injuries or damage attributed to improper use.
DESCRIPTION
This scale is equipped with high accuracy sensors for maximum precision as well as a digital
display with two touch buttons.
Maximum capacity: 3 kg | weight unit: 0.1 g.
QUICK GUIDE
• Remove all packaging material.
• Place the scale on a smooth and flat surface.
• Before the first use, charge the scale completely with the included USB-C charging cable. During
the charging process (approx. 2-3 hours) a control light flashes. As soon as the charging process
is finished, an acoustic signal sounds and the display shows "FULL". The weight and timer display
will appear automatically as soon as you disconnect the USB cable from the interface.
• To switch on the scale, press and hold the "POWER/TIMER" button for 3 seconds. An acoustic
signal will sound. The weight display shows "0 g" and the timer shows 0:00 after the scale has
leveled off. Now the scale is ready for use. The timer display switches off after approx. 1 minute
of inactivity.
• To select between the weight units g/oz/ml hold the „oz/ml/g/ZERO" button for 2 seconds
each.
• Put the foodstuff in the middle of the weighing surface and wait until the display is stable to
read the weight.
• Press the "POWER/TIMER" button to activate the timer. This is, for example, particularly useful if
you like to prepare your filter coffee directly on the scale and to monitor the infusion time. The
timer measures the time up to 99 minutes and 59 seconds. To stop the timer press the
"POWER/TIMER" button again. To reset the timer to 0:00 press the "POWER/TIMER" button
twice.
The maximum weight range is 3 kg. When the scale is overloaded the display shows "EEEEE".
Attention: By overloading of the scale, the weighing unit can be damaged!
6