Descargar Imprimir esta página

Husqvarna 917.374441 Manual Del Propietário página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
=See appropriate
section in manual
unless directed
to a Sears Parts & Repair
Center.
PROBLEM
CAUSE
Does
not start
1. Dirty airfilter.
2. Out of fue!.
3. Stab fuel.
4. Water in fuel.
5. Spark plug wire is
disconnected.
6. Bad spark plug.
7. Loose blade or broken
blade adapter.
8. Control bar in released
position.
9. Control bar defective.
10. Fuel valve lever (if so
equipped)
in OFF position.
11. Weak battery (if equipped).
12. Disconnected
battery
connector (if equipped).
CORRECTION
1. Clean/replace
air filter.
2. Fill fuel tank.
3. Empty fue! tank and refill tank
with fresh, clean gasoline.
4. Empty fuel tank and refill tank
with fresh, clean gasoline.
5. Connect wire to plug.
6. Replace spark plug.
7. Tighten blade bolt or
replace blade adapter.
8. Depress control bar to
handle.
9. Replace control bar.
10. Turn fuel valve lever
to the ON position.
11. Charge battery.
12. Connect battery to engine.
18

Publicidad

loading