Descargar Imprimir esta página

FILA FI8525 Manual De Usuario página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
- Battery parameter:
Rated voltage (VDC): 36V
Max. charging voltage (VDC): 42V
- Motor parameter:
Rated power (W): 250 W
Max. power (W): 300 W
- Charger parameters:
Rated power (W): 71W
Rated input voltage (VAC): 110 - 210V
Rated output voltage (VDC): 42V
Rated current (A): 1.5 Ah
Charging time: 3-4 h
- Lights: Built-in LED light, tail light.
- Brakes: Rear disc brake
Notes:
- Device height: from the ground to the highest part of the scooter;
- General range: measured when there is no wind and at 25 ° C, the scooter is fully loaded to
drive up to 15 km / h on a flat surface with a load of 75 kg.
Do not expose the E-Scooter at extreme temperatures, the battery could exploit.
-
The range depends on several factors:
- Topography: On level paths you have a greater range than on uneven ground.
- Weight: The range depends on the rider's weight.
- Temperature: Extreme temperatures reduce the range.
- Maintenance: If the E-scooter is charged properly and the battery is kept in good condition,
he range will be stable.
- Speed and riding style: The range is greater at constant speed than at frequent stops and
starts, acceleration and braking.
Care / Maintenance
Cleaning
If stains appear on the surface of your scooter, rub them with a soft and damp cloth.
In case of stubborn stains, you can first scrub with a soft cloth soaked in toothpaste, then rub
with a soft,damp cloth. Never clean with alcohol, gasoline or other corrosive or volatile che-
mical solvents. This may damage the appearance and structure of the vehicle. It is also for-
bidden to use a pressure washer to clean your scooter, you may be subjected to electric
shock or serious damage to your vehicle.

Publicidad

loading

Productos relacionados para FILA FI8525