Publicidad
Idiomas disponibles
Idiomas disponibles
PRUNER SAFETY WARNINGS
„ DANGER - Keep hands away from blade. Contact with
blade will result in serious personal injury.
„ Do not use the tool in bad weather conditions, espe-
cially when there is a risk of lightning. This decreases
the risk of being struck by lightning.
„ Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden and can be
accidentally cut by the blade.
„ Hold the tool by insulated gripping surfaces only,
because the blade may contact hidden wiring. Blades
contacting a "live" wire may make exposed metal parts
of the shear "live" and could give the operator an electric
shock.
„ Keep all parts of the body away from the blade. Do
not remove cut material or hold material to be cut
when blades are moving. Blades continue to move after
the switch is turned off. A moment of inattention while
operating the tool may result in serious personal injury.
„ When clearing jammed material or servicing the tool,
make sure the power switch is off and the battery pack
is removed or disconnected. Unexpected actuation of
the shear while clearing jammed material or servicing may
result in serious personal injury.
„ Carry the tool by the handle with the blade stopped
and taking care not to operate the power switch. Prop-
er carrying of the tool will decrease the risk of inadvertent
starting and resultant personal injury from the blades.
„ When transporting or storing the tool, always fit the
blade cover. Proper handling of the tool will decrease
the risk of personal injury from the blades.
„ Maintain a firm grip on handle while cutting.
„ A lways wear eye protection with side shields marked
to comply with ANSI Z87.1, along with head protection.
Following this rule will reduce the risk of serious personal
injury.
„ C lear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or loose string which
can become entangled in the cutting blade and create a
risk of serious personal injury.
„ B efore starting the power tool, make sure the blade is
not in contact with any object.
„ S top the unit, remove the battery pack, and make sure
the blade has stopped before setting the unit down.
„ N ever cut any material with a diameter larger than 1-1/4 in.
„ A lways stop the motor when cutting is delayed or when
walking from one cutting location to another.
„ K eep unit clean of clippings and other materials. They
may become lodged in the cutting blades.
„ S tore the unit inside in a dry place, either locked up or
up high to prevent unauthorized use or damage. Keep
out of the reach of children or untrained individuals.
„ N ever douse or squirt the unit with water or any other
liquid. Keep handles dry, clean, and free from debris.
Clean after each use; see storage instructions.
„ S ecure the unit while transporting. Don't grasp the ex-
posed cutting blades or cutting edges when picking up
or holding the appliance.
„ Battery operated units do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when unit
is not operating.
„ Remove the battery pack before making any adjustments,
cleaning, storing, or removing material from the unit, or
when not in use.
„ Use this product only with batteries and chargers listed in
tool/appliance/battery pack/charger correlation supple-
ment 988000-302.
„ Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also.
4 — English
Publicidad
