Publicidad
2.2 Using the Suspend to RAM Function
If you are using the Windows
the steps below.
1.
Select "Power Management Setup" in the main menu screen and
press <Enter>.
2.
In the "ACPI Function" field, select "Enabled".
3.
In the "ACPI Suspend Type" field, select "S3(STR)".
4.
Press <Esc> to return to the main menu.
5.
Select "Save & Exit Setup" and press <Enter>. Type <Y> and
press <Enter>.
6.
Install Windows
to ensure that the ACPI function is supported.
If you have previously installed Windows
upgrade the system in order to support ACPI. Please contact
Microsoft for upgrade information.
7.
Boot Windows
Start button. Move the cursor to Settings, then click Control
Panel.
To check whether ACPI was properly installed, double-click the
System icon. In the System Properties dialog box, click the
"Device Manager" tab. In "View devices by type", click "System
devices".
8.
Double-click the System icon. In the System Properties dialog
box, click the Performance tab.
9.
Click File System. In the "Typical role of this computer" field,
select "Mobile or docking system". Click Apply, then click OK.
Restart the computer.
10. Repeat step 7 to open the Control Panel dialog box. Double-
click the Power Management icon.
® ® ® ® ®
98 operating system, please follow
® ® ® ® ®
98 by typing the following parameter. This is
[drive]:>setup /p j
® ® ® ® ®
® ® ® ® ®
98. In the Windows
English
® ® ® ® ®
98, you need to
98 desktop, click the
2
43
Publicidad
