Arenti AInanny-Cam Manual Del Usuario página 7

FAQ
· How to disable the LED indicator/blue light with my camera?
Arenti APP >> Device (tap device to live video page) >> Settings >> Basic Function >> Network
Indicator: Disable it.
· How to turn off camera real-time monitor, and stop recording ?
Arenti APP >> Device (tap device to live video page) >> Settings >> Basic Function >> Privacy Protec-
tion >> Lens OFF.
· How to change WiFi or update WiFi password for device?
Please delete the camera on APP, tap "Add" follow the steps to use the new WIFI network to add the
camera again.
· How to share Arenti devices with friends and family?
Arenti APP >> Device (Tap device to live video page) >> Settings >> Device Share >> Add, follow the
guide to share your device.
· Failed to access the Live video, prompts offline?
�. Please ensure the camera is in the power-on state: camera network indicator will on.
�. Check the WiFi network is in good condition and restart the router.
�. Try to move the camera near the router, and check again.
�. Delete the camera from Arenti APP and add it again. Confirm the APP and camera firmware are the
latest versions.
If there doesn' t work, please contact support@arenti.com to get help.
Precautions
· The applicable working temperature of this product is �℃~��℃, please do not use it in an
environment where the temperature is too high or too low use this product.
· To use this product better, avoid the front and side of the lens close to the glass, white walls,
etc. light objects, so as not to cause the picture to be bright near, dark, or whitish in the
distance.
· Please make sure that the camera is installed within the range covered by Wi-Fi signal, and
placed as far as possible on the location where the signal is better, and try to install it away from
metal and microwave ovens that may affect the signal.
support@arenti.com
EN
EN