Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaningthe glass cooktop.
CEAppliancescom
Cleanyourcooktopafter
each spill. Use CERAMA
BRYTE ® CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEIL_dMA BRYTE _'Ceranfic
Cooktop
Cleaner
on the glass cooktop.
Other
creams
ma_ not be as eflectixe.
To inaii_taii_ and protect
the SUlti_ce _ff
your glass cooktop,
t011ow these steps:
,
l
[]
Before
using the cookto ) fi)r the
fi_t time, clean it with CEI_d'dA
BRYTE ') Ceralnic
Cooktop
Cleanei:
This helps protect
the top and
inakes
clean-up
easiei:
[]
Dail) tlse of CEl_z_d_/]_ BRYTE _:'
(2eramic
('xx)ktop
Cleaner
will help
kee I) the cooktop
looking
new.
[]
Shake the clealfing
cream well.
Appl_ a few drops of CEI_dMA
BRYTE e_Ceramic
Cooktop
Cleaner
directly to the cooktop.
[]
Use a p_}per towel or CEIL&MA
BRYTE _"Cleaning
Pad fi)r Ceran]ic
Cooktops
to clean the entire
cooktop
StlI'J[il c e.
[]
Use a dry cloth
or paper
towel
to relnove
all cleaning
residue.
No
need
to
rinse.
NOTE: It/a very important that you DO NOT
heat the cooktop until it has been cleaned
thorough/_
iii/ / /
/L ¸¸
( 2
Usea CERAMA BRYTE *_Cleaning
Pad for Ceramic Co&tops or a
Scetch-Brite ® Multi-Purpose No
Scratch blue scrub pad.
Burned-On Residue
WARNING: DAMAGE to yourg/asssurface
may occurif youusescrubpadsother than
thepad bciuded with yourcooktop.
[]
Allow the cooktop
to cool.
[]
Spread
a few drops
of CER,AAMA
BRYTE _> (]eralnic
Cooktop
(]leaner
to the entire burned
residue
area.
[]
Using the inchlded
CEIL_MA
BRYTE _>Cleanin-
Pad for Ceramic
Cooktops,
rub the residue
area,
ali))lxing, , pressure
as needed.
[]
If any
residue
renmins,
repeat
the
steps
listed
above
as needed.
[]
For
additional
protection,
after
all
residue
has
been
relnoxed,
polish
the
entire
surfi_ce
with
CERAMA
BRYTE
') (_eralnic
Cooktop
Cleaner
and
a paper
towel.
The CERAMA BRYTE '*_Ceramic
Co&top Scraper and aft
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts"
section
on next page.
NOTE:Do not use a duff or
nicked blade.
Heavy, Burned-On Residue
[]
Allow the cooktop
to cool.
[]
Use a single-edge
razor
blade
scraper
at approxinmtely
a 45 °
angle
against
the glass surface
and
scrape
the soil. It will be necessary
to apply
pressure
to the razor
scraper
in order
to remove
the
residue,
[]
After scraping
with the razor
scraper, spread a few drops of
(%l_d'dA
BRYTE <'_ Ceramic
()_oktop
Cleaner
to the entire
burned
residue
area.
Use the
CERAMA
BRYTE ') Cleaning
Pad
to remove
any renmilfing
residue.
[]
For additional
protection,
alter
all
residue
has been
relnoxed,
polish
the entire
surtace
with CERAMA
BRYTE ') Ceralnic
Cooktop
Cleaner
and
a paper
towel.
11
Publicidad
