Mixx Steambuds Ultra Guía Rápida página 2

[EN/US] QUICK START GUIDE
When first taking your earbuds out of the
packaging, please remove protective film
covering the charge points.
LET'S STAY CHARGED
Note: If your earbuds and charge case do not have any power when
you first unpack them, place the earbuds into the charge case and
plug the charge case into a USB port using the USB C cable [8
provided.
The Earbuds
A voice prompt "Battery low" allows for 2 minutes play time before
the earbud(s) powers down stating "Battery low, power off". The
Earbuds LED Light [2] will flash WHITE once and will then switch off.
Charge the earbuds using the Portable Charging Case [5] .
Each LEFT and RIGHT earbud has 4-line LED Charge Indicators L
and R on the case.
Place the earbuds in the case and close the lid to charge.
The 4 LED indicators L and R will flash to show that the earbuds are
charging for 15 seconds and then will turn off.
The Portable Charging Case
To check the battery status of the case, open the lid of the Portable
5
Charging Case [4] . The LED Digital Display [6] will show the
percentage of the battery remaining for 15 seconds.
With a Type C charging cable
[EN] [US]
IMPORTANT!
2
[CA]
1
8
5
6