Melchioni Family 18 C Manual De Instrucciones página 35

Shelves
To remove the shelves from the track, pull each shelf out to the shelf post, as shown
in figure A. Li� it up again, then slowly pull the shelf out, as shown in figure B.
Power failure
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of �mes the door is
opened. If the power is going to be off for a longer period of �me, you need to take
the proper steps to protect your contents.
Moving your chiller
Remove all items (bo�les)
•
Tape down securely all loose items (shelves) inside your appliance.
•
Turn the adjustable leg up to the base to avoid damage.
•
Tape the door shut.
•
Be sure the appliance stays secure in the upright posi�on during
transporta�on. If you absolutely need to transport the chiller horizontally,
transport the chiller on its back (door on top). Also protect outside of appliance
with a blanket, or similar item
8. TIPS

It is intended to be used exclusively for the storage of wine.

This refrigera�ng appliance is not suitable for the freezing foodstuffs.

The wine cooler is recommended to be designed at 12°C.

The shelves placed in factory mode is the most efficient use of energy
for the refrigera�ng appliances.
Fig. A
34
Fig. B