Before The First Use - Tristar MX-4168 Manual De Usuario

Instruction manual

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz).
item function
MX-4167
food processor
MX-4168
MX-4167
food processor
MX-4168
MX-4167
blender
MX-4168
MX-4168 shredder
• Both attachements (chopping blade and slicing and chopping disc)
could be used by all three speed settings.
• Note: make sure you'll never exceed the maximum filling mark.
• The blades of the slicing and chopping disc and the blade chopping
are very sharp, avoid physical contact, you can seriously injure.
uSe
Speed selector
1: for soft ingredients
2: for hard ingredients
• Pulse: short, fast chopping function for all kind of food
4
MX-4168__IM.indd 4
time of operation number of
(on/off) operation
30 sec. / 2 min. 3
30 sec. / 2 min. 3
<1min. / 2 min. 5
3 min. / 1 min. 10
the chopper
• This food processor is equipped with 2 safety switches, make sure you
have completed the following steps for a correct installation.
• Fit the detachable shaft onto the base.
• Screw the bowl over the detachable shaft on the device.
• NOTE: the bowl has to unlock the first safety switch. Keep the handle
pointed to the front and turn the bowl anticlockwise until you hear a
click and the handle is pointed to the right.
• Place the choppingblade in the bowl over the shaft.
• Put your ingredients into the bowl.
• Place the lid on the bowl.
• NOTE: the lid has to unlock the second safety switch. Make sure the
extended lip on the lid turns into the handle of the bowl until you hear
a click, the lid has to be turned anticlockwise.
Slicing and Shredding function
• Place the detachable shaft on the base, then place the bowl over
the shaft. Keep the handle pointed to the front and turn the bowl
anticlockwise until you hear a click and the handle is pointed to the
right.
• Fix the slicing/shredding knife to the detacheble shaft:
- knife upwards: slicing cut function
- knife downwards: shredding function
• Put the cover on the bowl. Make sure the extended lip on the lid turns
into the handle of the bowl until you hear a click, the lid has to be
turned anticlockwise. Then put the plug to the electric socket, turn the
switch to the desired level. Put in the food through the refill opening
of the cover, and push the food down slowly by using the food pusher.
Don't push the food with you fingers!
23-5-2013 11:01:40