Cleaning And Maintenance; Danger To Life; Technical Specifications - Omnitronic CDT-200 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Is your amplifier and your mixer properly adjusted?
Have you kept to all instructions given in this manual?
SYMPTOMS
Device does not react when swit-
ching on.
Player does not start operation
No sound
Does not read the program
Pop noise
Faderstart does not work

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
115/230 V AC, 50/60 Hz ~
Power consumption:
12 W
Type:
Single Compact Disc Player
Available disc:
Standard CDs 8 and 12 cm
Quantisation:
D/A-converter: 1 Bit
Sampler frequency:
44.1 kHz
Pitch adjustment:
+/- 16 %
Distortion:
0.02 %
S/N-ratio:
88 dB
Channel seperation:
80 dB
Frequency range:
20 - 20,000 Hz; +/- 1 dB
Analogue output:
unbalanced via RCA
Output level:
2 Vrms
Dimensions:
220 x 300 x 95 mm
Weight:
4.4 kg
Please note: Every information is subject to change without prior notice. 03.09.2004 ©
POSSIBLE CAUSES
Connection to mains disrupted.
CD is badly positioned or dirty
Check the mixer and amplifier
connections
The player is in normal playback
mode
Mixer or amplifier connections
inapropriate
Missing Audio Out-connection

DANGER TO LIFE!

Disconnect from mains before starting maintenance operation!
SOLUTION
Check
connection.
Reposition CD with label atop or
clean with a dry and soft cloth.
Possibly exchange connections.
Press the Play/Pause-button and
re-program
Check cable and jack quality
Connect the Audio Out-sockets
with the Line-input sockets of your
mixer
21/39
AC
plug
and
AC
10602279_V_1_2.DOC

Publicidad

Tabla de contenido
loading

Tabla de contenido