Descargar Imprimir esta página

EGO EG0800 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Never operate at higher speed than the maximum speed rating of the auger
bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
Battery-operated machines do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition. Be aware of
possible hazards even when the machine is not operating. Take care when
performing maintenance or service.
Do not wash with a hose; avoid getting water in motor and electrical
connections.
The ice blades are very sharp. Use extreme caution when drilling a hole or
replacing the blades. Put the blade guard on after each use.
Frequently check and ensure that the locking screw is secured in place.
Use only with the battery packs and chargers listed below:
BATTERY PACK
BA1400, BA1400-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2242T, BA2242T-FC, BA2800T, BA2800T-FC,
BA3360T, BA3360T-FC, BA4200T, BA4200T-FC,
BA4480T, BA4480T-FC, BA5600T, BA5600T-FC,
BA6720T, BA6720T-FC
SAVE THESE INSTRUCTIONS! Refer to them frequently and use them to instruct others
who may use this product. If you loan this product to someone else, also loan these
instructions to them to prevent misuse of the product and possible injury.
10
EARTH/ICE AUGER — EG0800/EG0800-FC/IG0800/IG0800-FC
CHARGER
CH2100, CH2100-FC,
CH3200, CH3200-FC,
CH5500, CH5500-FC,
CH2800D, CH2800D-FC
CH7000, CH7000-FC

Publicidad

loading

Este manual también es adecuado para:

Eg0800-fcIg0800Ig0800-fc