Publicidad
To place the activity toy on a level surface at least 2 m from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical wires;
The minimum clearance that needs to exist between the swing element(s) and the ground is 200mm,
The activity toys shall not be installed over concrete, asphalt or any other hard surface;
Don't exposure to the sun;
Keep the assembly and installation instructions for further reference;
The modifications made by the consumer to the original activity toy (for example the adding of an accessory)
shall be carried out according to the instructions of the manufacturer. In particular, instructions shall be
provided with a kit/accessory about the installation of rope/nets
concerning the minimum diameter, the need for fixation at both ends, overall length, and
positioning in relation to other structures.
Maintenance
Activity toys need of carrying out checks and maintenance of the main
parts (crossbeams, suspensions, anchors, etc.) at regular intervals, pointing out that if these checks are
not carried out the activity toy could overturn or otherwise become a hazard.
a) to check all nuts and bolts for tightness and tighten when required;
b) to oil all metallic moving parts;
c) to check all coverings for bolts and sharp edges and replace when required;
d) to check swing seats, chains, ropes and other means of attachments for evidence of deterioration;
e) to replace defective parts in accordance with the manufacturer's instructions;
f) to check swing seats, chains, ropes and other means of attachments for evidence of deterioration;
e) to replace defective parts in accordance with the manufacturer's instructions;
12
Publicidad
