EMPTYING THE WATER TANK
When the tank is full, the atmosphere lamp will flash and the unit will turn o .
1. When full, unplug the dehumidifier and simply pull the water tank out.
2. Place the water tank a stable surface and remove tank cover.
3. Then, gently tilt tank over a sink to empty.
4. When done, replace cover on tank and then carefully slot water tank back in.
Note:
1. Do not remove the floater from the water tank. If the floater in the water tank is removed,
the sensor may not be able to determine the water level stored in the tank properly that
may lead to water overflow leak from the water tank.
2. When placing back the water tank, use your hands to press the tank back in its place. If the
water tank is not placed properly, protections from water overflow may not operate as
expected
CLEANING AND MAINTENANCE
WARNING: Turn the dehumidifier OFF and remove the plug from the wall outlet before
handling pr cleaning it.
General Exterior Cleaning
Clean the exterior of the appliance, removing any dust or light debris by wiping it with a soft,
dry cloth.
Water Tank Cleaning
WARNING: Never leave water in the water tank when the appliance is not in use. The water
tank should be cleaned at least every week.
If the water tank is dirty, just use cold water to clean it. Do not use detergent, steel wool,
chemically treated dust cloth, gasoline, benzene. thinner or other solvents. Otherwise, it
may damage the water tank and cause it to leak.
4
UK
UK