weasy SIL85 Manual De Instrucciones página 7

indicator led is off.
Notes: The vacuum sealing time is about 2 minutes. For the big size vacuuming bag or
vacuuming canisters, vacuuming may not finished but machine stop working and blue
indicator is off, please press "vacuum seal" button again to continue the vacuuming process
until it is finished, blue indicator is off.
MAINTENANCE AND CLEANING.
1. Before cleaning the vacuum sealer, please turn off the
vacuum sealer and unplug the power cord.
2. Do not immerse the vacuum sealer in water or other
liquid.
3. Wipe the surface and vacuum channel with a piece of
damp cloth or sponge after the vacuum sealer is cooling
down.
4. Do not use a brush to clean the vacuum sealer, it may
scratch the surface.
5. During the vacuum sealing process, small amounts of
liquids, crumbs or food particles can be inadvertently
pulled into the vacuum channel. Empty the vacuum channel
after each use with a piece of cloth or paper.
6. After each use, place the paper stand between the
upper lid and lower lid to prevent sealing foam
compression.
Troubleshooting
To quickly solve your problems and to prevent improper using and settings, please follow
operations below. If your problems or enquiry cannot be eliminated after reading the table, please
do not
Problems
Vacuum sealer does not work
Vacuum pump is running, but bag 1. Adjust the bag and try again. Make sure the open
hesitate
Solution
1. Make sure vacuum sealer is plugged in, make sure
wall outlet is functional.
2. Make sure the power cord and the vacuum sealer are
not defective. For your safety, do not operate defective
vacuum sealer.
to contact us.