BORETTI B400 Manual De Instrucciones página 59

Inserting the filter
1. To insert the selected filter in the porta-filter, make sure to
align the notch on the filter with the groove inside the porta-
filter.
2. Turn the filter to the left or right to lock in place. This will help
secure the filter in the porta-filter.
NOTE: To remove and clean the filter, turn filter to the left or right
to align the filter notch with the groove inside the porta-filter.
WARNING: Make sure the filter has cooled before attempting to remove the filter.
Filling with ground coffee
Place the selected filter on porta-filter as follows:
1. Fill the filter with fresh, fine ground espresso coffee (do not overfill).
Note: the ground coffee amount shouldn't exceed the MAX mark
2. Tamp and compress firmly and evenly ground coffee.
3. Clean any excess coffee from the rim to ensure proper fit under brew head.
1
Place the porta-filter
1. Position porta-filter underneath the brew head, attach porta-filter by first moving
retainer clip back.
2. Position handle so that the handle lines up with the open lock icon "
fits into the groove.
3. Then, slowly turn it to the right until the retention clip is aligned with the closed lock
symbol " " on the unit.
1
Placing the cup(s)
1. Pull out the height adjustment tray if you are using a small "demitasse" cup to brew
espresso.
2. Keep the height adjustment tray inside its compartment if you are using a larger cup to
brew cappuccino.
2
2
1
2
3
3
" on the unit and
59
EN