Publicidad
Idiomas disponibles
Idiomas disponibles
User manual
Thank you for choosing a ISY product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for future
reference. If you sell the device, please pass these operating instructions on
to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• TV wall bracket
• TV support arms (2x)
• Installation kit (see contents, Fig. 1)
• These operating instructions
3. Safety Notes
Warning
• Given the multitude of terminal devices and wall structures available
on the market, the supplied mounting kit is unable to cover every
option.
• It occasionally happens that the screws for attaching the terminal
device to the wall bracket are too long.
• Please note that the supplied wall plugs are for use with concrete brick
and solid brick walls only.
• Read the operating instructions for your terminal device before
attempting to mount it. The instructions provide information about the
type and measurements of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening
materials for mounting the terminal device, purchase these from a
specialised dealer.
• If the wall on which the bracket is to be mounted is made of different
material types and construction types to those specified, purchase
suitable mounting materials from a specialised dealer.
• Never apply force during mounting. This can damage your end device
or wall bracket.
• If in doubt, have this product mounted by a qualified technician - do not
attempt to mount it yourself!
• Do not mount the product above locations where persons might linger.
• Once you have mounted the product and the attached load, check that
they are sufficiently secure and safe to use.
• You should repeat this check at regular intervals
(at least every three months).
• When doing so, ensure that the product does not exceed its maximum
permitted carrying capacity and that no load exceeding the maximum
permitted dimensions is attached.
• Make sure that the product is loaded symmetrically.
• Maintain the necessary safety clearance around the attached load
(depending on the model).
• In the event of damage to the product, remove the attached load and stop
using the product.
4. Intended use and specifications
• The bracket is used for wall mounting flat panel displays for non-
commercial, private household use.
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
2
Maximum load bearing
50 kg
capacity:
Screen size:
58,0 - 127,0 cm (US: 23" - 50")
Depth:
6,85 cm
Angle:
-15°/+15° (depends on the device)
Wall mounting plate
45,0 x 10,0 cm
dimensions:
Mounting holes:
according to the VESA standard 400x400
5. Installation requirements and installation
Note
• Only mount the TV wall bracket with the help of a second person. Get
the support and help you need.
• Different end devices have different connecting springs and areas with
cooling vents. Before permanently attaching the TV bracket on the
terminal device, ensure that all connecting springs and cooling vents
are not covered up.
• The same mounting kit is included with all of our TV wall brackets.
Depending on the product and mounting type, you may not need to
use the entire mounting kit. Unneeded screws and other small parts
may be left over, even if the wall bracket is properly mounted. Keep
these leftover parts with the operating instructions in a safe place,
just in case you might need them later on (e.g. should you move, sell
the product, mount the wall bracket in a different location, buy a new
TV, etc).
Warning
• Before installing the bracket, ensure that the wall on which the
television is to be mounted is suitable for the weight and make sure
that no electrical wires, water, gas or other lines are located at the
installation location.
• Please note that the provided wall anchors are only approved for
concrete and solid brick walls.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation
instructions (Fig. 1 ff.).
6. Setting and maintenance
Note
Only adjust the TV wall bracket with the help of a second person. Get the
support and help you need.
• Check that the bracket is secure and safe to use at regular intervals (at
least every three months). Only use water or standard household cleaners
for cleaning.
• Pull the safety cord downwards for securing, hang the carrier arms in the
wall plate and let snap into place by releasing (fig. 4).
7. Warranty Disclaimer
Imtron GmbH assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
8. Service and Support
Please contact your retailer if you have any inquiries.
Publicidad
