ICS Schneider Messtechnik IDT 600 Manual De Instrucciones página 6

Before starting an operation or procedure, use only approved
engineers who have the necessary skills (if necessary, with
qualifications from an approved training establishment). Follow
good engineering practice at all times.
Technical Advice
For technical advice contact Druck or subsidiary manufacturer of
this product.
Specification
Maximum Working Pressure
Pressure Connection
Pressure Media
Product Compatibility
Equipment Overview
Refer to Figure A1 and the key below:
1. Top section. Connect to device under test.
2. Chamber of dirt trap.
3. Bottom section. Connect to Druck calibrator.
4. Bonded seal required for G 1/8 connections only.
Copyright 2003 Baker Hughes Company.
2 | IDT600 Instruction Manual–English
35 bar (3.5 MPa / 500 psi)
IDT 600-1:
IDT 600-2:
Gases compatible with stainless steel,
acrylic and nitrile.
DPI 610PC, DPI 610SPC, DPI 615PC,
DPI 615SPC with G 1/8 or 1/8 NPT
fittings.
G 1/8
1/8 NPT