Publicidad
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-5801
KIT FEATURES
• Shaft and DIN unit provisions
• Rear support provisions
KIT COMPONENTS
• A) Radio housing • B) Rear support bracket
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-1770 - Ford/Lincoln/Mercury wiring harness for select 1985-2004
• 70-5603 - Low-level amplifier integration harness for select Ford vehicles
• 70-5605 - Amplifier bypass harness for Lincoln Navigator and
Ford Contour/Mustang/Ranger/Expedition
Antenna Adapter:
• Not required
• 86-5618 or AW-FDRT removal keys • Socket wrench • Phillips screwdriver • Cutting tool
APPLICATIONS
Ford 1997-1998
99-5801/ AW-580FD
A
TOOLS REQUIRED
METRA. THE WORLD'S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
B
metraonline.com
Publicidad
Resumen de contenidos para META AW-580FD
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-5801 APPLICATIONS Ford 1997-1998 99-5801/ AW-580FD KIT FEATURES • Shaft and DIN unit provisions • Rear support provisions KIT COMPONENTS • A) Radio housing • B) Rear support bracket WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: •...
- Página 2 99-5801 Table of Contents Dash Disassembly – Ford Expedition 1997-1998 .....................3 – Ford F-150 1997-1998 ....................3 Kit Assembly – Shaft head unit provision ....................4 – DIN head unit provision ....................5 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
- Página 3 Dash Disassembly 99-5801 All Vehicles 1. Place your index fingers on the inner edges of the A/C vents and push inward. 2. Grasp the exposed lip of each vent opening “A” and pull out on the radio trim bezel. (Figure A) 3.
- Página 4 Kit Assembly 99-5801 2-Shaft head unit provision 1. Slide the aftermarket head unit into the kit and secure with shaft nuts. (Figure A) 2. Mount the Rear Support Bracket to the back of the head unit with the necessary hardware. (Figure B) 3.
- Página 5 Kit Assembly 99-5801 DIN head unit provision 1. Cut and remove the shaft supports from the Radio Housing. 2. Slide the DIN cage into the Housing and secure by bending the metal locking tabs down. (Figure A) 3. Slide the aftermarket head unit into the cage until secure.
- Página 6 Notes...
- Página 7 Notes...
- Página 8 INSTALLATION INSTRUCTIONS FOR PART 99-5801 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...