Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the battery
When inserting a new battery, make sure that you insert the battery into the battery compartment (3) at the same time
as the battery slide. In this way, the battery cannot slip in the battery compartment (3).
To insert a new button cell battery (CR2025), you must first open the battery compartment (3). Proceed as follows:
1. Loosen the screw on the back of the product.
2. Press the tension latch and remove the battery slide from the battery compartment (3). Remove the used battery.
3. Now insert the new button cell battery into the battery slide. Make sure that the polarity of the battery is correct (positive
pole towards the back of the product).
4. Then put the battery slide with battery back into the battery compartment (3) and tighten the screw.
The product is now ready again and can be used.
TECHNICAL DATA
Item number
Power supply
Type of battery
Battery run time
Display size
Input pressure
Reflectance
MAINTENANCE & CLEANING
Short circuit hazard!
Water or other liquids entering the housing can cause a short circuit.
• Never immerse the product in water or other liquids.
• Make sure that no water or other liquids get into the housing.
IMPORTANT!
Risk of damage!
Improper handling of the product may result in damage to the product.
• Do not use aggressive cleaning agents, brushes with metal or nylon bristles, or sharp or metallic cleaning objects such as
knives, hard spatulas, and the like. These can damage the surfaces.
1. Clean the product with a soft, dry cloth.
2. If the product is stubbornly dirty, use a slightly damp cloth and a little mild detergent if necessary.
3. Allow all parts to dry completely afterwards.
Storage
All parts must be completely dry before storage.
• Always store the product in a dry place.
• Store the product out of reach of children, securely closed and at a storage temperature between 5 °C and 20 °C (room
temperature).
Disposal
Do not dispose of batteries or electric and electronic devices in the normal household waste. The consumer is legally
obliged to return electrical and electronic devices and batteries that are at the end of their useful life to the point of sale
or public collection points that have been set up for this purpose. Legislation in the country of use governs individual
details regarding disposal. The symbol on the product, the user guide or the packaging indicates this legal requirement.
LST8BB / LST8BP
via battery: 3 V DC
1x CR2025
up to 12 months
21,59 cm (8,5")
100 – 200 g
25 – 30 %
Font colour
Lifetime
Ambient temperature
Product material
Dimensions
Weight
Colour
7
USER GUIDE
colourful
approx. 50,000 writing times (+/- 5%)
0°C - +40°C
LCD display, HIPS frame
190 x 230 x 6 mm
145 g
blue (LST8BB) / pink (LST8BP)
Publicidad
