Publicidad
USING ON THE
mm
RECHARGEABLE
BATTERIES
Be sure to use size AA Ni-Cd 1.2 V rechargeable
batteries, which are commercially
available.
Be sure to read the instructions
of the purchased
rechargeable
batteries before use.
When using on the rechargeable batteries for the first
time, charge them until the battery indicator goes out.
* Before
charging
the batteries,
close
the
disc
compartment.
You cannot charge the batteries while it
is opened.
1 Insert the rechargeable
batteries with the ~ and
O marks correctly aligned.
2 Connect the AC adaptor.
(3 to DC 6 V jack
@to a wall outlet
3
Press 9STOPIOFt=/CHARGE
to start charging.
C-On is displayed and the battery indicator@
blinks.
Recharge the batteries until the battery indicator goes
out. After charging, disconnect the AC adaptor.
Time to recharge the batteries
Recharge the batteries when the E (ied) lights. If the
unit remains in use after E (red) lights, Lo batt is displayed
and the current operation will stop.
To stop charging
Press
STOP/OFF/cHARGE
during charging.
USING ON AC HOUSE CURRENT
Connect the supplied AC adaptor in the same way as
recharging the batteries.
During operation on AC house current, all of the battery
indicator lights.
Publicidad
