Publicidad
Trouble Shooting
Please consult your local dealer for problem solving. If you still can not find
solutions to the problems stated below.
Condition
Cause
Correct
The power switch is on
but the projector is not
running.
•
Is the power cord
disconnected?
•
is the cover
completely closed?
•
Connect the power
cord to power source.
•
Close the cover
completely.
The power switch is on,
and the fan is rotating but
the lamp is not on.
•
Is the lamp inserted
correctly in the base?
•
Is the lamp burnt out?
•
Set the lamp on lamp
base.
•
Replace lamp.
The power switch is on,
and the lamp is
operating, but no
projected image on
screen.
•
Is the projection Head
open, and projection
mirror is tilted up?
•
Open the projection
head, and tilt the
projection mirror up.
The image is blurred.
•
is the distance
between the screen
and projection either
too far or too close?
•
Is the labeled
p"
side of the Fresnel
lens facing the stage
glass?
•
Is the projected image
out of focus?
•
Is the transparency
flat?
•
Position the projector
from the screen within
"1-2.6 meter".
•
Put the labeled
p"
side of the Fresnel
facing the stage glass
and then fix the
Fresnel lens on the
clip holder.
•
Adjust the focus knob
to obtain a good
focus.
•
Ensure that the
transparency is flat.
The light is not bright
enough.
•
Is the lamp at end of
life?
•
Replace the lamp.
12
Publicidad
