Publicidad
Idiomas disponibles
Idiomas disponibles
08 Damp Alert
09 Drum Light
10 Adjust Time
11 Smart Control (DVE**
models only) / Smart
Monitor (DVG** models
only)
12 Power
13 Start/Pause (Hold to
Start)
NOTE
Do not take extremely tangled items from your washer and put them into the dryer. They can degrade the
drying efficiency of the dryer or cause the door to open. We recommend that you untangle the items before
putting them into the dryer. Also, do not put objects on the dryer, especially on the control panel.
CAUTION
Do not spray water directly onto the control panel. This may cause a system failure.
Untitled-4 45
This alert is available for all Sensor Dry cycles except for ACTIVEWEAR.
Available dry levels are Normal, More, and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks when
average dryness of the items in the load is 80 % dry. This lets you take items
that you don't want fully dried or that dry quickly out of the dryer early while
letting others continue to dry.
Press to turn the interior lamp on or off. The lamp stays lit for 2 minutes after
it has turned on, regardless of whether the power is on or off or the door is
open or closed, and then turns off automatically.
You can change the set time for the selected cycle. This is available only
with TIME DRY, QUICK DRY, and AIR FLUFF. To change the cycle time, press
Adjust Time
or Adjust Time
After connecting the Tumble Dryer to your home network using the
SmartThings app, you can control or monitor the dryer remotely. When
started, the Smart Control (Smart Monitor) indicator blinks. The dryer enters
waiting mode and waits for remote commands.
Press to turn on/turn off the dryer.
Press and hold to start operation or press to stop operation.
until the desired time is displayed.
English 45
2022-09-05
10:39:03
Publicidad
