MR. Steak MS-3B-PG Manual Del Propietário página 5

LP CYLINDER (NOT SUPPLIED WITH THIS GRILL)
The LP (Liquid Propane) cylinder meant for use with this grill must have a 20-lb. (9.1 kg) capacity incorporating a
GCC Type 1 cylinder valve and a listed overfilling protection device (OPD). This grill is designed to fit Worthington-,
Manchester- or SMPC-brand 20-lb (9.1 kg) cylinders. Other brands may fit this grill if the top collar and bottom
support ring have similar dimensions.
• DO NOT connect a propane cylinder exceeding this capacity.
• DO NOT connect this grill to an existing #510 POL cylinder valve with left-hand threads.
• DO NOT connect to a cylinder that uses any other type of valve connection device.
The GCC Type 1 cylinder valve can be identified by the large external threads on the valve outlet.
The cylinder must be equipped with:
• A shut-off valve terminating in a GCC Type 1 cylinder valve outlet
• A GCC Type 1 cylinder valve that prevents gas flow until a positive seal is made
• A collar to protect the cylinder shut-off valve
• A safety relief device having direct communication with vapor space of the cylinder
WARNING
A frosty cylinder valve indicates possible gas overfill. Close
the LP cylinder valve and call your LP dealer immediately.
PROPANE CYLINDER LEAK TEST
A leak test should be done each time an LP cylinder is refilled or exchanged. DO
NOT smoke or use any type of flammable material in the area during this leak test.
DO NOT use an open flame to check for leaks.
1. Test outside in a well-ventilated area.
2. Use a paintbrush and a solution of 50% liquid dish detergent and 50% water. DO
NOT use cleaning agents because they can damage the fuel supply parts.
3. Brush the detergent solution onto the areas indicated by the arrows in the
diagram to the right.
4. Developing bubbles indicate a gas leak. If this happens, contact your LP dealer
to secure a replacement tank.
Collar
Regulator
GCC Type 1 Cylinder Valve
5
Pressure Relief Valve
GCC Type 1
Shut-off Valve
Dust Cap
Hand
Wheel
1-800-227-7776