Flying insects are naturally attracted to ultra-violet light. This fly catcher has
an ultra-violet (UV) bulb that prooves to be utterly irresistible to flying insects.
Once the flies are attracted into the device, they will come to rest on the
adhesive-coated glue board inside and become permanently captured. Once
the board is full, it can quickly and easily be replaced. It is easy to check as the
front of the device lifts up to enable easy access to the adhesive board.
Your FKWS18 comes with 5 adhesive sheets. If you need more, you can order
these separately from Duronic (Shine-Mart Ltd).
Designed with an ornate elegant design, this light fixing will fit in beautifully
with any interior design.
No chemical substances are involved, so this appliance is safe to use for
humans and pets. The ultra-violet light provides an odorless, noiseless and
safe method of ridding your home of pesky flying insects.
1. Remove the device from the package carefully. Check the body and parts
for any potential shipping damage.
2. Check the posistion of the bulb and the glue board to see if they are
positioned correctly.
3. Connect the device to the nearest mains electrical socket to test the light.
4. If the bulb lights up immediately, proceed to installing the lamp.
5. If the bulb doesn't light up, refer to the troubleshooting section to
determind the issue.
About the FKWS18 Wall Sconce
Before Installing
7