Publicidad
Idiomas disponibles
Idiomas disponibles
English
Dehumidifier
DH243
DESCRIPTION
A Louvers
B Handle
C Air outlet
D Lamp
E Wheels
F Control Panel
G Carbon filter
H Air inlet
I
Back cover
J Continuous drain port
K Water tank
L Power cord
a Lamp button
b Down button
c Up button
d Mode button
e Timer button
f
Oscillation button
g UV button
h Ionizer button
i
On/Off button
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Before each use, completely unplug the power
cable from the power supply.
- Do not use the appliance if its start / stop device
does not work.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Unplug the power supply from the mains when
not in use and before performing any cleaning
operations.
- Keep this appliance out of the reach of children
and / or persons with reduced physical, sensory
or mental abilities or who are unfamiliar with its
use.
- Do not expose the appliance to extreme tem-
peratures. Keep the device in a dry, dust-free
place protected from direct sunlight. Never
leave the appliance unattended. It will also save
energy and prolong the life of the device.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the on/off switch
(i).
- (d)
Select the desired function.
- SMART: Smart function. This function is by
default the first time the appliance is switch on.
It maintains the ideal domestic environment
humidity of 55%.
- HIGH: "high speed" function. The compressor
will work until desired humidity is measured.
Modify the humidity level through buttons (b)
and (c).
- LOW: "low speed" function. The compressor will
work until desired humidity is measured. Modify
the humidity level through buttons (b) and (c).
- FAN: fan function
- (a)
When the appliance starts, the lamp
will turn on automatically. The lamp color will
change according to the humidity conditions.
- Red: (Humidity level >70%)
- Orange: (70%> humidity level >60%)
- Green: (humidity level <60%)
- (f)
There are 3 different oscillation types:
45 fixed degrees, 90 fixed degrees and 90
oscillant degrees.
- (g)
Sterilization function that eliminates
germs, bacteria and improves air quality.
-
Select the humidity level desired.
The humidity level by default is 55%.
-
Timer function. There are different pro-
grams to set up the timer:
- If the timer setting is performed when the
appliance is in working status, it will switch off
after the desired time (1-24 hours). Press the
Publicidad
