URBANGLIDE RIDE 100 MAX Manual Original página 29

1. Insert the handlebars into the stem without
jamming the power cables.
Handlebar mounting
2. Fix the handlebars with the 4 screws provided. Use the M3 spanner to
attach the handlebars to your scooter. Make sure it is secure and the
handlebars are stable before using your scooter.
Stem/brake maintenance
1. If you feel that the brakes are too tight, please use the
M5 hexagonal spanner to loosen the plate screws on the
disc brake, slide the brake cable back so that the length
is slightly shorter, and then lock the plate screws; If you
feel that the brake is too loose, loosen the plate screws,
slide the brake cable back so that the length is slightly
longer, and then lock the plate screws
2. If the stem of the scooter shakes, please use the M5
hexagonal key to lock the two screws of the folding
mechanism.
3. Before adjusting, make sure the scooter is stable and
secure to prevent it from tipping.
11