Kenmore 116.35922 Manual Del Propietário página 15

DIRT SENSOR
The electronic dirt sensor is a feature
which wilt detect particles as they pass
through the vacuum cleaner.
The dirt sensor indicators are located on
the front of the vacuum cleaner above the
dust bag cover.
Dirt
Sensor
• When little or no dirt is present the dirt
sensor is green.
• With medium dirt concentration the dirt
sensor is amber.
o With heavy concentration the dirt
sensor is red and amber.
WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before per-
forming maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
i
OPERATION
As you vacuum, the amber and red
indicator lights will come on and stay on as
long as the sensor detects a high
concentration of particles passing through
the vacuum cleaner.
TO CLEAN DIRT SENSOR OPTICS
The dirt sensor optics consist of two optic
cells located inside the dust bag port.
Occasionally, it may become necessary to
clean the two optic cells to assure
maximum performance,,
It is recommended the optic cells be
cleaned:
= When the red light stays on
continuously.
° When dirt or dust adheres to the
optic cells,
• Whenever the dust bag is removed.
Dirt Senso_
Optic Cells
To clean the sensor, wipe the optic cells
with a soft, dry cloth, Never use cleaners
or liquids as they can help speed the
recoating of the optic cells and make it
necessary to clean them much sooner than
normal. The dirt sensor area can be
reached by removing the dust bag.
15