Dynamic Range - Power Dynamics PDC150 Manual De Instrucciones

DOWNMIX
DOWNMIX
Select analogue sound format.
LT/RT: It's used when the unit is connected to a Pro Logic
receiver through stereo RCA cables.
Stereo: Used when the unit is connected via amplifier through
stereo RCA cables.
DOLBY SURROUND
OP MODE
Select Line Out or RF Remodulation.

DYNAMIC RANGE

To avoid disturbing the neighbours at night, you can use this
function to reduce the sound effects volume without changing the
original tone.

OFF No Compression

2/8 High compression, late night use

4/8 Medium compression for general use

6/8 Low compression

FULL Full-volume, cinematic sound
DUAL MONO
Here you can choose between stereo, left channel mono, right
channel mono or mixed mono. This function can e.g. be used for
a VCD with two languages. (e.g. English on the left side and
French on the right side)
Stereo output: Outputs audio in stereo.
L-mono: Plays the Left side only through both Left and Right
speaker outputs.
R-mono: Plays the Right side only through both the Left and Right
speaker output.
Mix-mono: Plays virtual stereo with Left and Right Mono coming
out of the Left and Right speaker outputs.
10