NOTES
Before using the device, check if the rated voltage and rated frequency is in line with the local power supply
so as not to damage the fan motor.
IMPORTANT SAFETY INSTRUCTIONS
READ THIS INSTRUCTION MANUAL CAREFULLY. PLEASE KEEP THIS MANUAL, WARRANTY, RECEIPT
AND, IF POSSIBLE, THE CARTON AND INNER PACKAGING.
•
It is strictly prohibited to function in conductive dust or flammable, explosive or high humidity, corrosive
gases environment.
•
Before shifting position of fans, power supply must be cut off and blades in static position.
•
Avoid placing fan near curtain and small corners to enjoy maximum airflow.
•
Do not handle power plugs with wet hands to avoid risk of electric shock.
•
Fans in the process of operation, please avoid to insert hands or other objects in the functioning of the
blades.
•
Children of less than 3 years should be kept away unless they are continuously supervised.
•
Children of more than 3 years and less than 8 years old shall only switch on/off the appliance provided
that it has been placed or installed in its intended normal operating position as long as they have been
given supervision or instruction concerning the use of the appliance in a safe way and understand the
hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean
the appliance or perform user maintenance.
•
This appliance can be used by children aged from 8 years and above if they have been given supervision
or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children without supervision.
•
It is not recommended that ceiling fans and gas appliances be operated in the same room at the same
time.
•
If the cord is damaged,it must be replaced by the manufacturer or its service agent or qualified
personnel to avoid risk.
ASSEMBLING INSTRUCTIONS
7. Unscrew the screws on the fan body and mount the rear guard onto the fan body by fastening these
screws.
8. Assemble the blade onto the motor shaft and fix it with the bolt on the blade. Lock the front guard
onto the rear guard.
9. Mount the fan onto the base tube and fix it by screws.
10. Mount the whole fan onto the wall with bolts.
11. Mount the control box onto the wall.
5
EN